DIAL

Sandblasted finish

Indexes with SuperLuminova

WATER RESISTANCE

5 ATM

CROWN

At 4 o'clock with printed BA111OD logo

Step 1: Winding the automatic mechanical movement

An automatic mechanical watch recharges itself through the movement of its oscillating rotor located at the back of the watch (kinetic energy). However, when your watch is completely stopped, it is recommended to manually wind it around 40 times. Keep the crown in position 0 and turn it clockwise 40 times. Then the watch will recharge itself with the kinetic energy.

Step 2: Setting the moonphase

Set the time roughly to 6:30 first (a “safe zone” for the date mechanism).

Then, using the corrector pusher at 8 o'clock with a pointed tool, press once for each day since the last new moon until the moonphase indicator matches the current lunar phase (using an online lunar calendar as reference for example: https://www.timeanddate.com/moon/phases/)

Keep the crown pushed in during this operation.

Step 3: Setting the date

Pull the crown out to position 1. Turn it away from you until you reach the date of the day before the desired date. You will then reach the correct date by setting the time as explained in step 4.

WARNING: The date should not be changed between 09:00 pm and 03:00 am.

Step 4: Setting the time

Pull the crown out to position 2. Turn it towards you until you reach the correct date and time, paying attention to the am and pm settings.

Caution: Do not turn the hands in the opposite direction and do not forget to push the crown back in when the operation is finished to maintain the watch's water resistance.